Engineering Technician IV - Machine Shop
Company Name:
The Tatitlek Corporation
Tracking Code
1655-205
Job Description
Job specifications are intended to present a descriptive list of the range of duties performed by employees. Specifications are _not__ intended to reflect all duties performed within the job._
## SUMMARY
The Engineering Technician IV performs non-routine assignments of substantial variety
and complexity, using operational precedents that are not fully applicable, such
assignments that are typically parts of broader assignments, are screened to eliminate
unusual design problems. This incumbent may plan such assignments. This technician
receives technical advice from supervisor or engineer. Work is reviewed for technical
adequacy (or conformity with instructions). This position may be assisted by lower level
technicians and have frequent contact with professionals and others within the
establishment, and performs one or a combination of such typical duties as:
ESSENTIAL DUTIES AND
Responsibilities:
Developing or reviewing designs by extracting and analyzing a variety of
engineering data, applying conventional engineering practices to develop,
prepare, or recommend schematics, designs, specifications, electrical drawings
and parts lists. (Examples of designs include: detailed circuit diagrams;
hardware fittings or test equipment involving a variety of mechanisms;
conventional piping systems; and building site layouts).
Conducting tests or experiments requiring selection and adaptation or
modification of a wide variety of critical test equipment and test procedures,
preparing and operating equipment, recording data, measuring and recording
problems of significant complexity that sometimes require resolution at a higher
level, and analyzes data and prepares test reports.
Applying methods outlined by others to limited segments of research and
development projects, constructing experimental or prototype models to meet
engineering requirements; conducts tests or experiments and redesigns as
necessary and recording and evaluating data and reports findings.
NON-ESSENTIAL DUTIES AND RESPONSIBILITIES
Other duties as assigned.
May require occasional travel.
Required Skills
REQUIREMENTS/QUALIFICATIONS
Education and Experience
Shall possess at least 8 years full-time professional experience as an Engineering Technician
High School education or equivalent
Secret Clearance
Skills, Knowledge and Abilities
Working knowledge of Microsoft Office Programs
Ability to program CAD/CAM software such as SolidWorks and CAMworks
Program G code for CC controllers
Working knowledge of machine controls (Fanuc, Yasnac, Prototrak, Anilam Crusader, Haas, etc.)
Precision grinding, sheet metal fabrication work, and welding
Use Computerized Numerical Control (CNC) equipment, lathes, and milling machines
Installation of hardware/equipment
Estimate time to complete jobs and basic job cost
Plan, purchase/order, receive and process materials and tooling for specific jobs
Operate manual machine shop equipment such as lathes, grinders and other shop equipment
PHYSICAL REQUIREMENTS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
WORK ENVIRONMENT
Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work is typically performed in a controlled office environment. While performing the duties of this job, the employee may be exposed to weather conditions prevalent at the time.
The noise level in the work environment is usually moderate.
SUPERVISORY RESPONSIBILITIES
None
Additional Qualifying Factors:
As a condition of employment, must pass a pre-employment drug screening, as well as have acceptable reference and background check results. May be subject to a government security investigation and must meet eligibility requirements for access to classified information. Only US citizens are eligible for a security clearance. Must have or be eligible for security clearances. May require occasional travel.
Native preference applies pursuant PL93-638.
The Tatitlek Corporation is an Equal Opportunity Employer
Minorities/Women/Veterans/Disabled
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex national origin, or protected veteran status and will not be discriminated against on color, religion, sex, national origin, or protected veterans status and will not be discriminated against on the basis of disability or any other status protected by law
Job Location
Dahlgren, Virginia, United States
Position Type
Full-Time/RegularEstimated Salary: $20 to $28 per hour based on qualifications.
The Tatitlek Corporation
Tracking Code
1655-205
Job Description
Job specifications are intended to present a descriptive list of the range of duties performed by employees. Specifications are _not__ intended to reflect all duties performed within the job._
## SUMMARY
The Engineering Technician IV performs non-routine assignments of substantial variety
and complexity, using operational precedents that are not fully applicable, such
assignments that are typically parts of broader assignments, are screened to eliminate
unusual design problems. This incumbent may plan such assignments. This technician
receives technical advice from supervisor or engineer. Work is reviewed for technical
adequacy (or conformity with instructions). This position may be assisted by lower level
technicians and have frequent contact with professionals and others within the
establishment, and performs one or a combination of such typical duties as:
ESSENTIAL DUTIES AND
Responsibilities:
Developing or reviewing designs by extracting and analyzing a variety of
engineering data, applying conventional engineering practices to develop,
prepare, or recommend schematics, designs, specifications, electrical drawings
and parts lists. (Examples of designs include: detailed circuit diagrams;
hardware fittings or test equipment involving a variety of mechanisms;
conventional piping systems; and building site layouts).
Conducting tests or experiments requiring selection and adaptation or
modification of a wide variety of critical test equipment and test procedures,
preparing and operating equipment, recording data, measuring and recording
problems of significant complexity that sometimes require resolution at a higher
level, and analyzes data and prepares test reports.
Applying methods outlined by others to limited segments of research and
development projects, constructing experimental or prototype models to meet
engineering requirements; conducts tests or experiments and redesigns as
necessary and recording and evaluating data and reports findings.
NON-ESSENTIAL DUTIES AND RESPONSIBILITIES
Other duties as assigned.
May require occasional travel.
Required Skills
REQUIREMENTS/QUALIFICATIONS
Education and Experience
Shall possess at least 8 years full-time professional experience as an Engineering Technician
High School education or equivalent
Secret Clearance
Skills, Knowledge and Abilities
Working knowledge of Microsoft Office Programs
Ability to program CAD/CAM software such as SolidWorks and CAMworks
Program G code for CC controllers
Working knowledge of machine controls (Fanuc, Yasnac, Prototrak, Anilam Crusader, Haas, etc.)
Precision grinding, sheet metal fabrication work, and welding
Use Computerized Numerical Control (CNC) equipment, lathes, and milling machines
Installation of hardware/equipment
Estimate time to complete jobs and basic job cost
Plan, purchase/order, receive and process materials and tooling for specific jobs
Operate manual machine shop equipment such as lathes, grinders and other shop equipment
PHYSICAL REQUIREMENTS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
WORK ENVIRONMENT
Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work is typically performed in a controlled office environment. While performing the duties of this job, the employee may be exposed to weather conditions prevalent at the time.
The noise level in the work environment is usually moderate.
SUPERVISORY RESPONSIBILITIES
None
Additional Qualifying Factors:
As a condition of employment, must pass a pre-employment drug screening, as well as have acceptable reference and background check results. May be subject to a government security investigation and must meet eligibility requirements for access to classified information. Only US citizens are eligible for a security clearance. Must have or be eligible for security clearances. May require occasional travel.
Native preference applies pursuant PL93-638.
The Tatitlek Corporation is an Equal Opportunity Employer
Minorities/Women/Veterans/Disabled
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex national origin, or protected veteran status and will not be discriminated against on color, religion, sex, national origin, or protected veterans status and will not be discriminated against on the basis of disability or any other status protected by law
Job Location
Dahlgren, Virginia, United States
Position Type
Full-Time/RegularEstimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
